Product Introduction
Wedge anchors are one type of expansion bolts. It is relatively easy to install, has a reasonable price, and is one of the most widely used expansion bolts.
Its material is made of carbon steel, stainless steel, etc. Its specifications are diameter M6/M8/M10/M12/M14/16/M20 etc. At the same time, customers can customize the diameter and length according to construction requirements.
Its material is made of carbon steel, stainless steel, etc. Its specifications are diameter M6/M8/M10/M12/M14/16/M20 etc. At the same time, customers can customize the diameter and length according to construction requirements.
[njwa_button id="3060"]
Product Details
SIZE: M6, M8, M10, M12, M14, M16, M20
MATEAIL: Carbon Steel, Stainless Steel
STANDARD: GB, DIN, BSW, ANSI, ISO
GRADE: 4.8, 8.8, 10.9, 12.9
SURFACE TREATMENT: ZP, HDG, BLACK, Dacromet
CUSTOMIZED SUPPORT: YES
Product Gallery
Wedge Anchor
Stainless Steel Wedge Anchor
Carbon Steel Wedge Anchor
Product Specifications
| Size (mm) | Drilling Diameter (mm) | Total Length (mm) | Min Hole Depth (mm) | Anchor Thickness (mm) | Thread Length (mm) |
|---|---|---|---|---|---|
| M6x 50 | 6 | 50 | 20 | ≤25 | 25 |
| M6x 80 | 6 | 80 | 20 | ≤55 | 50 |
| M6x 100 | 6 | 100 | 20 | ≤75 | 50 |
| M8x 50 | 8 | 50 | 25 | ≤20 | 25 |
| M8x 80 | 8 | 80 | 25 | ≤50 | 50 |
| M8x 100 | 8 | 100 | 25 | ≤70 | 50 |
| M8x 120 | 8 | 120 | 25 | ≤90 | 60 |
| M8x 150 | 8 | 150 | 25 | ≤120 | 80 |
| M10x 60 | 10 | 60 | 30 | ≤20 | 25 |
| M10x 80 | 10 | 80 | 30 | ≤40 | 40 |
| M10x 100 | 10 | 100 | 30 | ≤60 | 50 |
| M10x 120 | 10 | 120 | 30 | ≤80 | 60 |
| M10x 150 | 10 | 150 | 30 | ≤110 | 80 |
| M10x 180 | 10 | 180 | 30 | ≤140 | 80 |
| M12x 70 | 12 | 70 | 40 | ≤20 | 35 |
| M12x 100 | 12 | 100 | 40 | ≤ 50 | 60 |
| M12x 120 | 12 | 120 | 40 | ≤70 | 60 |
| M12x 150 | 12 | 150 | 40 | ≤100 | 80 |
| M12x 180 | 12 | 180 | 40 | ≤130 | 100 |
| M12x 200 | 12 | 200 | 40 | ≤150 | 100 |
| M14x 80 | 14 | 80 | 40 | ≤30 | 35 |
| M14x 100 | 14 | 100 | 40 | ≤50 | 50 |
| M14x 120 | 14 | 120 | 40 | ≤70 | 60 |
| M16x 80 | 16 | 80 | 45 | ≤15 | 30 |
| M16x 100 | 16 | 100 | 50 | ≤35 | 40 |
| M16x 120 | 16 | 120 | 50 | ≤55 | 60 |
| M16x 150 | 16 | 150 | 50 | ≤85 | 80 |
| M16x 200 | 16 | 200 | 50 | ≤135 | 80 |
| M16x 250 | 16 | 250 | 50 | ≤185 | 100 |
| M20x 120 | 20 | 120 | 65 | ≤30 | 50 |
| M20x 150 | 20 | 150 | 65 | ≤60 | 60 |
| M20x 200 | 20 | 200 | 65 | ≤110 | 100 |
| M20x 300 | 20 | 300 | 65 | ≤210 | 120 |
Product FAQs
Drill holes in the base material according to installation and usage requirements.
Use a blow tool to clear dust and debris from the hole to make it easier to follow the wedge anchor.
Use a hammer to hammer the wedge anchor into the hole.
Using a wrench, tighten the wedge anchor until it meets the installation requirements.
